Description
B&W Hard Water Spot Remover – Zero-Streak Hard Water Stain Cleaner
B&W Hard Water Spot Remover removes stubborn hard-water stains, mineral deposits & calcium rings in seconds—without haze.
Pair it with our Ice Cream Foam Shampoo for a glossy maintenance wash and All In One Polish to seal the shine.
🎥 *Watch Full Demo Video 👇*
—
Why B&W Hard Water Spot Remover is the Best Solution for Cars
Hard-water minerals (calcium, magnesium, silica) bond tightly to glass, paint and chrome. Normal shampoos can’t dissolve these deposits; aggressive scrubbing creates micro-scratches and haze. B&W’s -controlled acid-blend chemistry breaks the mineral bond in seconds, lifting stains so the surface wipes clean with a zero-streak finish.
What It Removes
•White/grey hard-water spotting on glass & windshields
•Mineral rings on painted panels and ORVMs
•Chalky deposits on chrome, steel & plastic trims
•Water lines on home glass, tiles, taps (test spot first)
Where To Use (Automotive & Studio)
•Car glass, sunroof, mirrors, headlights/taillights
•Painted panels & clear coat (cool panel only)
•Chrome parts, badges, stainless trims
•Workshop glass partitions, tiles, fixtures
How To Use (Detailer’s Method)
1.Wash & dry the area to remove loose dust.
2.Shake bottle. Apply a few drops on a applicator/microfiber.
3.Work a small area (20×20 cm) with light pressure for 15–30 sec.
4.Mist DM water or wipe with damp microfiber to neutralize.
5.Buff dry with a second clean towel. Shine restored.
Pressure-Shop Express Method
•For large glass areas, apply with a foam/sponge pad, allow 30–60 sec contact, agitate once, then rinse thoroughly and dry.
Dilution (for maintenance & sensitive areas)
•Full strength: severe, etched or old stains.
•No Dilution: regular maintenance on glass/chrome.
•No Dilution on quick wipe for fresh spots after washes.
(Always start mild on unknown surfaces and increase strength only if needed.)
Pro Tips (Studios & Washing Centres)
•Work panel by panel in shade; surface must be cool.
•On stubborn glass marks, repeat a second short cycle rather than heavy pressure.
Safety & Care
•Wear gloves. Avoid eyes/skin.
•Do not use on hot surfaces or bare aluminum.
•Do not allow to dry on the surface.
•In case of eye contact, rinse with water for 15 minutes.
•Keep away from children.
FAQs
Q: Will it scratch glass or paint?
No. The formula chemically loosens mineral deposits so you can wipe them away with light mechanical action. Always use clean microfiber and light pressure.
Q: Can it remove etched marks?
If minerals have etched into glass/clear coat, chemical removal reduces the white halo but very deep etching may need compounding or polishing afterward.
Q: Is it safe on ceramic-coated cars?
Yes, for spot treatment—use 1:1 dilution, short contact time, and rinse well. Re-top with your preferred sealant/polish.
What’s in the Box
•B&W Hard Water Spot Remover (500gm)
•Usage guide with dilution & pro tips
*How to Use:*
• Shake bottle well before use.
• Apply a small amount on a microfiber pad or applicator.
• Rub gently on the affected glass, paint or chrome area.
• Rinse off with clean water or wipe with a damp cloth.
—
*Professional Tips:*
• Always test on a small area before full application.
• For extreme spots, allow product to dwell for 20–30 seconds before wiping.
• Avoid direct sunlight or hot surfaces during application.
For super-shiny tyres after removing spots, check out our B&W Citrus Tyre Polish —
Citrus Tyre Polish
—
Product Details:*
• Paint Safe, Glass Friendly, Chrome Shine
• Made for Professionals & Enthusiasts
• Manufactured by: *Jain Enterprises, Tumkur – 572104*
• Best Before: 1 Year from Date of Manufacturing
,• Country of Origin: 🇮🇳 India
Reviews
There are no reviews yet.